0005
TM 10-4930-369-13&P
Figure 4.
Three Walls Standing.
7.
Firmly push the supports into the wall pockets (Figure 4, Item 2) and stand up the three walls.
8.
Roll the FDS across the lowered fourth wall and position the FDS in the center of the SCS.
9.
Insert the remaining three wall supports (Figure 5, Item 2) in the pockets of fourth wall section (Figure 5,
Item 1) and stand the wall up.
Figure 5. Wall Supports in Fourth Wall.
10. Inspect the fuel source output valve to ensure that valve is closed.
11. Position two hose supports (e.g., sandbags, wood or concrete blocks) at least one foot tall, outside the SCS to
act as suction and discharge hose supports to prevent the wall from collapsing under the hose weight.
00054
