TM 10-4930-369-13&P
FIELD MAINTENANCE
REPLACE HOSE REEL ASSEMBLY
INITIAL SETUP:
Tools and Special Tools
Spill Kit (WP 0062, Item 20)
Washer, Split (WP 0064, Item 7)
Wire, Brush, Scratch (WP 0063, Item 9)
GMTK (WP 0063, Item 7)
Personnel Required
Wrench Pipe, 18 Inch (WP 0063, Item 12)
Quartermaster and Chemical Equipment
Materials/Parts
Repairer 91J - 2
Apron, Rubber (WP 0062, Item 1)
Extinguisher, Fire (WP 0061)
References
Gloves, Chemical/Oil Protective (WP 0062, Item 10)
Compound, Sealing (WP 0062, Item 6)
O-Ring, Hose Reel Riser (WP 0064, Item 3)
Goggles, Industrial (WP 0062, Item 13)
Grease, Automotive and Artillery (WP 0062, Item 14)
Equipment Condition
Pail, Utility, 5 Quart (WP 0062, Item 16)
FDS disconnected from power source (WP 0005)
Pan, Drain, 5 gal cap (WP 0063, Item 6)
Filter drained, discharge hose drained (WP 0005)
Rag, Wiping (WP 0062, Item 18)
WARNING
Maintenance must not be performed on equipment that is operating. Failure to comply may
result in injury or death to personnel.
WARNING
Personnel Protective Equipment (PPE), must be worn during maintenance and cleaning
procedures. Failure to comply may result in injury to personnel.
Chemical/Oil protective gloves and a rubber apron must be worn by personnel handling fuel.
Failure to comply may result in injury to personnel.
REPLACE
Remove Hose Reel
1. Remove swivel joint IAW WP 0035.
2. Ensure hose has been completely unwound from hose reel (Figure 1, Item 5).
00331
