0032
TM 10-4930-369-13&P
1.
Place ground wire loop (Figure 1, Item 1) and (Figure 2, Item 2) against lat side of clip (Figure 1, Item 3) and
(Figure 2, Item 2) and attach wire loop with machine screw (Figure 1, Item 2) and (Figure 2, Item 3).
Figure 2. Ground Wire Loop Attached to Ground Clip.
2.
Attach stamped nut (Figure 1, Item 4) to protruding screw threads. Tighten stamped nut securely against
clip (Figure 2, Item 3).
3.
Test for resistance between the ground clips of the two grounding reels. Resistance should be less than 25
ohms.
4.
Rewind ground wire into grounding reel if needed.
END OF TASK
END OF WORK PACKAGE
00322