0024
TM 10-4930-369-13&P
Figure 12. Switch Enclosure and Gland Nut.
NOTE
Four screws on switch cover are captive screws. Screws will remain with the switch cover
when the cover is removed from the enclosure.
2.
Using 7/16 wrench, loosen four screws (Figure 12, Item 1) from the switch cover (Figure 12, Item 2). Pull
switch cover away from the switch enclosure.
3.
Disconnect black wires (Figure 13, Item 1) from toggle switch terminals (Figure 13, Item 2). Set aside switch
cover and switch.
Figure 13.
Black Wires.
00248