TM 10-4930-369-13&P
FIELD MAINTENANCE
REPLACE POWER PLUG
INITIAL SETUP:
Tools and Special Tools
References
GMTK (WP 0063, Item 7)
Materials/Parts
Equipment Condition
Corrosion Preventive Compound (Lithium Grease)
FDS disconnected from power source (WP 0005)
(WP 0062, Item 7)
Personnel Required
Quartermaster and Chemical Equipment
Repairer 91J
WARNING
Maintenance must not be performed on equipment that is operating. Failure to comply may
result in injury or death to personnel.
REPLACE
Remove Power Plug
NOTE
An electrical wiring diagram (Figure 5) is provided at the end of this work package.
1.
Loosen two captive screws (Figure 1, Item 1) on plug housing (Figure 1, Item 2).
Figure 1.
Power Plug.
00231