0021
TM 10-4930-369-13&P
Table 2. Maintainer PMCS For FDS -- After.
EQUIPMENT
ITEM TO BE
ITEM
INTERVAL
NOT READY/
CHECKED OR
PROCEDURE
NO.
AVAILABLE IF:
SERVICED
Fuel nozzle lever
1
Fuel Nozzle
After
1.
Ensure fuel nozzle lever (Figure 1, Item
is not working.
2) operates correctly, without binding or
jamming.
2.
Check that quick-disconnect coupler
Quick-
(Figure 1, Item 1) operates correctly on
disconnect
the fuel nozzle.
coupler
damaged or not
working.
Figure 2. Fuel Nozzle.
3.
Check fuel nozzle does not leak.
Nozzle does not
work or leaks.
Table 3. Maintainer PMCS For FDS -- Monthly.
EQUIPMENT
ITEM TO BE
ITEM
INTERVAL
NOT READY/
CHECKED OR
NO.
PROCEDURE
AVAILABLE IF:
SERVICED
1
Monthly
Tire
Tire pressure
1.
Check tire pressure and inlate as
below required
necessary.
pressure on
sidewall.
2.
Check axle and wheel bearing for
Lubrication not
presence of grease, if grease itting is
performed.
present.
Table 4. Maintainer PMCS For FDS -- Semiannually.
EQUIPMENT
ITEM TO BE
ITEM
INTERVAL
NOT READY/
CHECKED OR
NO.
PROCEDURE
AVAILABLE IF:
SERVICED
1
Semiannually
Grounding Reel
1.
Check electrical continuity between two
greater than 25
ground clips has resistance less than 25
ohms. Replace or
ohms.
00212