0022
TM 10-4930-369-13&P
TIRE INFLATION SERVICE
1. Remove cap from tire valve stem (Figure 2, Item 1).
Figure 2.
Tires.
2.
Using inlator gauge, check tire pressure. If gauge pressure is above the recommended pressure embossed
on tire sidewall, relieve tire pressure to sidewall pressure. If gauge pressure equals the recommended
pressure embossed sidewall, go to step 5. If gauge pressure is below recommended pressure embossed on
sidewall, go to step 3.
3.
Inlate tire to recommended pressure embossed on sidewall.
4.
Using inlator gauge, check tire pressure. Go to step 2.
5.
Replace cap on tire valve stem (Figure 2, Item 1).
END OF TASK
END OF WORK PACKAGE
00223