TM 10-4930-369-13&P
FIELD MAINTENANCE
REPAIR PUMP
INITIAL SETUP:
Tools and Special Tools
Spill Kit (WP 0062, Item 20)
GMTK (WP 0063, Item 7)
Personnel Required
Quartermaster and Chemical Equipment
Materials/Parts
Repairer 91J
Apron, Rubber (WP 0062, Item 1)
Compound, Sealing (WP 0062, Item 6)
References
Extinguisher, Fire (WP 0061)
Gloves, Chemical/Oil Protective (WP 0062, Item 10)
Goggles, Industrial (WP 0062, Item 13)
Pail, Utility, 5 Quart (WP 0062, Item 16)
Equipment Condition
Pan, Drain, 5 gal cap (WP 0063, Item 6)
Rag, Wiping (WP 0062, Item 18)
FDS disconnected from power source (WP 0005)
WARNING
Personnel Protective Equipment (PPE), must be worn during maintenance and cleaning
procedures. Failure to comply may result in injury to personnel.
Escaping fuel under pressure has suficient force to penetrate the skin. A fuel leak must not
be approached until all pressure is removed from the system. Failure to comply may result in
death or injury to personnel.
Chemical/Oil protective gloves and a rubber apron must be worn by personnel handling fuel.
Failure to comply may result in injury to personnel.
REPAIR
Remove Gasket Pump Inlet Gasket
NOTE
Perform steps 1 and 3 only if pump inlet cam-locking coupling half is not connected to suction
hose.
Perform steps 2 and 3 only if pump inlet cam-locking coupling half is connected to suction hose.
00271
