TM 10-4930-369-13&P
FIELD MAINTENANCE
SERVICE UPON RECEIPT
INITIAL SETUP:
Personnel Required
DA PAM 750-8
DD Form 361
Quartermaster and Chemical Equipment
SF Form 364
Repairer 91J - 2
References
AR 735-11-2
CHECKING UNPACKED EQUIPMENT
1. Inspect the components for shipping damage to the packaging materiel. Report any damage on SF Form
364 (Report of Discrepancy (ROD), as prescribed in AR 735-11-2 (Reporting of Supply Discrepancies).
Retain packaging materiel for future use.
2. Check the components against the packing slip to see if the shipment is complete. Report all discrepancies in
accordance with DA PAM 750-8.
3. Inspect the components for any damage during shipment. If a component has been damaged, report the
damage on DD Form 361 (Transportation Discrepancy Report (TDR)).
4. Inspect the low meter for current (within one year) calibration sticker/certiication. Send uncertiied low meters
to Test, Measurement, and Diagnostic Equipment (TMDE) for calibration.
END OF TASK
INSTALLATION INSTRUCTIONS
Installation instructions are not required for the FDS.
END OF TASK
END OF WORK PACKAGE
00191/blank