0005
TM 10-4930-369-13&P
Figure 22. Drained Pan Beneath Pump Inlet.
3.
Run pump, discharging fuel into equipment being serviced until no fuel is dispensed from nozzle. Do not run
longer than 2 minutes.
4.
Disconnect suction hose (Figure 23, Item 2) from pump inlet (Figure 23, Item 1). Install dust plug in pump
inlet. Place suction hose coupling into drain pan.
Figure 23.
Hose in Drain Pan.
5.
Disconnect suction hose at fuel source.
6.
Raise fuel source end of suction hose. Allow suction hose to drain into pan at pump.
7.
While walking from fuel source to FDS, coil suction hose.
000515
