0005
TM 10-4930-369-13&P
Figure 13. Fuel Nozzle Housing.
6.
Remove fuel nozzle (Figure 13, Item 2) from housing (Figure 13, Item 4) and extend fuel nozzle and discharge
hose to the fueling point.
7.
Set the toggle switch to ON (Figure 14). Verify the discharge hose is pressurizing.
Figure 14.
Toggle Switch ON.
8.
Open ilter vent valve (Figure 15, Item 1) slightly to bleed air from the ilter. Monitor closely and close the vent
valve as soon as fuel is discharged. Clean any spilled fuel immediately IAW local SOP.
000510