0040
TM 10-4930-369-13&P
4.
Apply a thin, even coating of corrosion preventive compound (Figure 7, Item 1) to the switch cover lange
surface (Figure 7, Item 2), where it will mate to the switch enclosure lange.
Figure 7. Corrosion Preventive Compound Applied.
5.
Using 7/16 wrench, attach switch cover (Figure 8, Item 3) to switch enclosure using four captive screws
(Figure 8, Item 2).
6.
Tighten gland nut (Figure 8, Item 1).
Figure 8.
Gland Nuts.
7.
Perform an operational test IAW WP 0005. Monitor for proper operation of the FDS.
00407