0034
TM 10-4930-369-13&P
Install Fuel Nozzle
1. Ensure safety ring (Figure 4, Item 3) is against hex itting stop (Figure 4, Item 4).
Figure 4.
Nozzle.
2.
Push the collar (Figure 4, Item 2) away from the nozzle (Figure 4, Item 1), and irmly push the nozzle into
the coupler (Figure 4, Item 4).
3.
Release the collar to secure nozzle to coupler.
4.
Slide the safety ring (Figure 4, Item 3) into the groove near the collar (Figure 4, Item 2).
5.
Perform an operational check IAW WP 0005. Monitor for proper operation of the FDS.
6.
Reel hose back in until nozzle seats into nozzle housing.
7.
Pivot locking plate closed and secure with pin.
END OF TASK
END OF WORK PACKAGE
00344