TM 10-4930-369-13&P
.
OPERATOR INSTRUCTIONS
EMERGENCY
INITIAL SETUP:
Materials/Parts
Spill Kit (WP 0062, Item 20)
Apron, Rubber (WP 0062, Item 1)
Personnel Required
Extinguisher, Fire (WP 0061)
Petroleum Supply Specialist 92F - 2
Gloves, Chemical/Oil Protective (WP 0062, Item 10)
Goggles, Industrial (WP 0062, Item 13)
References
Pail, Utility, 5 Quart (WP 0062, Item 16)
AR 200-1
Pan, Drain, 5 gal cap (WP 0063, Item 6)
FM 10-67-1
Rag, Wiping (WP 0062, Item 18)
FIRE
WARNING
Leaking fuel can ignite and cause serious injury to personnel and damage to equipment. Failure to
comply may result in injury or death to personnel.
When handling fuel, personnel must take appropriate measures to minimize the risk of ire, explosion,
injury, illness, and contamination of personnel and the environment. Safety precautions for ire and spill
control containment measures must be strictly observed. Failure to follow this warning may result in
injury or death to personnel.
Refer to Environmental Protection and Enhancement (AR 200-1) in the event of a ire.
1. Set the toggle switch to OFF (WP 0004) or disconnect power at source.
2. Close valves on the fuel source, if possible.
3. Using ire extinguishers or available ire ighting equipment, extinguish ire.
4. After ire is extinguished, check FDS for damage caused by ire.
5. Notify Maintainer Maintenance.
00081
