0026
TM 10-4930-369-13&P
3.
Remove end cap (Figure 3, Item 3) from electrical enclosure (Figure 3, Item 2).
Figure 3. Pump Motor Enclosure.
4.
Push cable (Figure 3, Item 1) into electrical enclosure (Figure 3, Item 2) until wires stick out from electrical
enclosure (Figure 3, Item 5).
5.
Remove electrical tape from all wire nuts (Figure 3, Item 4).
6.
Tag and disconnect wire nuts from connections and untwist and separate wire connections.
7.
Pull cable (Figure 3, Item 1) from electrical enclosure (Figure 3, Item 2).
00264