0015
TM 10-4930-369-13&P
NOTE
If ittings interfere with knobs, then rotate top clamp to clear knobs of ittings.
4.
Lift the ilter shell (Figure 5, Item 3) to the ilter head (Figure 5, Item 7) , making sure the O-ring (Figure 5, Item
6) remains in place. Ensure ilter drain is aligned as shown (Figure 5, Item 4).
5.
Align shell knobs (Figure 5, Item 5) so they do not interfere with ittings.
6.
Rotate knobs (Figure 6, Item 2) over clamps (Figure 6, Item 1).
7.
Tighten knobs (Figure 6, Item 2), alternating in a criss cross fashion. Hand tighten.
Figure 6.
Knobs and Clamps.
8.
Ensure ilter drain valve is closed (WP 0030).
00156