Click here to make tpub.com your Home Page

Page Title: PREPARATION FOR STORAGE OR SHIPMENT
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 10-5430-238-12&P
OPERATOR AND UNIT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
COLLAPSIBLE FABRIC TANKS, FUEL STORAGE, 3,000,
10,000, 20,000, AND 50,000 GALLON
PREPARATION FOR STORAGE OR SHIPMENT
PREPARATION FOR STORAGE OR SHIPMENT
WARNING
Sludge that accumulates at the bottom of the tank gives off toxic and explosive
vapors. Inhaling these vapors can cause lead poisoning. When cleaning the
fuel tanks, provide ample ventilation to dissipate harmful fumes.
Always wear protective goggles, a breathing apparatus, and other protective
gear when cleaning the tank interior. Fuel vapors are toxic and can damage
eyes, skin, and lungs.
Fuel vapors are extremely flammable. Exercise care to prevent sparks when
working near or in the tank. Death or severe personal injury can result if safety
precautions are not strictly observed.
CAUTION
Always handle the tank carefully. Pad the components stored with the tank to
avoid chafing during storage or transportation. Rough handling or careless
storage can damage the tank.
NOTE
Prior to storage the tank should be disassembled, purged of all residual fuel and
fumes, cleaned, and preserved with all its components for future use.
1. Drain fuel from the tank (WP 0005 00).
2. Remove the drain hose assembly from the drain fitting and install the drain plug (WP 0028 00 or
3. Remove the filler/discharge elbows from the filler/discharge adapters (WP 0027 00).
4. Remove the vent and pipe assembly from the flanged adapter, and install the dust cap
5. Inflate the tank with air and air-dry the tank for 24 hours.
6. Remove the filler/discharge assembly from the tank (WP 0027 00).
7. Flush the tank with detergent solution.
8. Remove the detergent solution from the tank with a shop vacuum.
9. Flush the tank with clear water.
10. Air-dry the tank with a blower until the tank is dry.
11. Apply technical talc (Item 10, WP 0040 00) to the tank interior.
12. Install the filler/discharge assembly on the tank (WP 0027 00).
0031 00-1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business