FILLER/DISCHARGE ASSEMBLY SERVICE AND REPAIR

TM 10-5430-238-12&P

0027 00

OPERATOR AND UNIT MAINTENANCE MANUAL

(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

COLLAPSIBLE FABRIC TANKS, FUEL STORAGE, 3,000,

10,000, 20,000, AND 50,000 GALLON

FILLER/DISCHARGE ASSEMBLY

SERVICE AND REPAIR

INITIAL SETUP

Tools

Equipment Condition

Tool Kit General Mechanics

Fuel tank drained

(Item 1, WP 0033 00)

(WP 0005 00)

Torque Wrench (in-lb)

Filler/Discharge hose removed

(Item 2, WP 0033 00)

(WP 0022 00)

Materials/Parts

Mandatory Replacement Parts

Detergent

Gasket

(Item 3, WP 0040 00)

(Item 1, WP 0042 00)

Dry Cleaning Solvent

Gasket

(Item 4, WP 0040 00)

(Item 3, WP 0042 00)

Rags, Wiping

Gasket

(Item 6, WP 0040 00)

(Item 18, WP 0042 00)

Silicone Compound

Lockwasher

(Item 9, WP 0040 00)

(Item 4, WP 0042 00)

O-Ring

(Item 17, WP 0042 00)

DISASSEMBLY

CAUTION

Be sure to take off the closure plate before removing the flanged adapter. The

flanged adapter is bolted to the closure plate and suction stub. If the flanged

adapter is removed first, the hex head nuts bolted to the suction stub will fall

into the tank.

NOTE

The filler/discharge fitting on the discharge end requires a female/male elbow. The

filler/discharge fitting on the fill end requires a female/female elbow.

1. Remove 4-inch elbow (1) by pulling outward on cam-lever arms (2), and lifting elbow (1) from

flanged adapter (3).

2. Remove and discard elbow gasket (4) from inside elbow (1).

3. Remove twenty screws (5) and washers (6) from closure plate (7). Lift closure plate (7) from tank

fitting (8).

4. Remove and discard o-ring (9) from the packing groove located in tank fitting (8).

5. Remove eight nuts (10), lockwashers (11), screws (12), and gaskets (13) from suction stub (14),

flanged adapter (3), and gasket (15). Discard lockwashers (11), gaskets (13), and gasket (15).

6. Remove and discard gasket (16) from inside dust cap (17).

0027 00-1