0036
TM 10-4930-369-13&P
4.
Raise pipe assembly (Figure 9, Item 3) and attach to low meter outlet housing, using four screws (Figure 9,
Item 4). Finger-tighten screws.
Figure 9.
Attached Flow Meter.
5.
Check inlet and outlet housings, gaskets and lange alignments (Figure 9, Item 2), then tighten four inlet
screws (Figure 9, Item 1) and four outlet screws (Figure 9, Item 4).
6. If necessary, raise front left ilter knob and tighten.
7. With an assistant, install cargo container to frame and aligning latched with keepers.
8. Secure cargo container by raising latch handles.
9. Install hairpin cotter pins into latches.
10. Perform an operational check IAW WP 0005. Monitor for proper operation of the FDS.
END OF TASK
END OF WORK PACKAGE
00368