0036
TM 10-4930-369-13&P
Install Flow Meter
1. Place new gasket in groove in low meter inlet housing (Figure 7, Item 1).
Figure 7. Flow Meter Installed onto Filter Assembly.
NOTE
When orienting low meter on ilter assembly lange, use care so that gasket remains in groove
on low meter inlet housing.
2.
Orient low meter housing (Figure 7, Item 4) on lange (Figure 7, Item 2) and attach low meter housing to
lange using 4 screws (Figure 7, Item 3). Finger-tighten screws.
00366