|
|
TM 10-4320-202-15
CHAPTER 5
GENERAL MAINTENANCE INSTRUCTIONS
Section I. SPECIAL TOOLS AND EQUIPMENT
5-3. Specially Designed Tools and
5-1. Special Tools and Equipment
Equipment
No special tools or equipment are required to
perform direct and general support and depot
No specially designed tools and equipment
maintenance on the pumping assembly.
are required to perform direct and general
support and depot maintenance on the pump-
5-2. Field and Depot Maintenance
ing assembly.
Repair Parts
Field and depot maintenance repair parts list
is not part of this manual.
Section Il. TROUBLESHOOTING
Possible remedy
Probable cause
5-4. General
Replace crankcase (para
Cylinder wall worn or
scored.
8-14) .
This section provides information useful in
Replace damaged oil
Oil pump not operating
diagnosing and correcting unsatisfactory oper-
pump parts (para 6-6).
effectively.
ation or failure of the pumping assembly or
Replace damaged bearings
Main or connecting rod
any of its components. Each trouble symptom
bearings faulty.
stated is followed by a list of probable causes
of trouble. The possible remedy recommended
is described opposite the probable cause.
5-7. Knock in Engine
Possible remedy
Probable cause
5-5. Engine Fails to Start
Overhaul engine.
Loose or burned out
Possible remedy
connecting rod bearing.
Probable cause
Repair or replace valves
Valves or valve seat de-
Loose or worn piston pin _ _ _ Replace piston, piston pin
or valve seat (para 6-4
fective.
and connecting rod as
or 6-14).
necessary (para 6-8).
Magneto defective _ _ _ _ _ Overhaul or replace mag-
neto (pare 6-2).
Compression weak _ _ _ _ Replace piston rings (para
5-8. Engine Smokes Excessively
Possible remedy
Probable cause
Piston or rings worn or
Replace piston or rings
5-6. Excessive Oil Consumption
damaged.
Possilde remedy
Probable cause
Replace crankcase (para 6-
Cylinder walls scored or
Replace piston rings
Piston rings worn or
10).
Worn.
broken.
5-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |