 |
|||
|
|
|||
|
Page Title:
CHAPTER 4. FIELD MAINTENANCE INSTRUCTIONS |
|
||
| ||||||||||
|
|
 TM 10-4320-202-15
CHAPTER 4
FIELD MAINTENANCE INSTRUCTIONS
Section I. GENERAL
9117CA, 15671CA and 4074CA. They provide
4-1. Scope
information on the maintenance of the equip-
These instructions are published for the use
ment, which is beyond the scope of the tools,
of direct and general support and depot main-
equipment, personnel, or supplies normally
tenance personnel maintaining the pumping
available to using organizations.
assembly, flammable liquid, Barnes Models
Section Il. DESCRIPTION AND DATA
support and depot maintenance personnel. Re-
4-2. Description
fer to Chapter 1 of this manual for general
A general description of the Pumping Assem-
tabulated data information.
bly, Flammable Liquid, 50 gpm, Barnes Models
9117 CA, 15671CA and 4074CA, the location
b. Engine Repair and Replacement Stand-
and description of the identification and in-
struction plates, and information on the differ-
tolerances, desired clearances, and maximum
ences in models are contained in Chapter 1 of
allowable wear and clearances.
this manual. The repair and maintenance in-
c. Nut and Bolt Torque Data.
structions are described in the appropriate
sections of this manual.
Spark plug _ _ _ _ _ _ _ _ _ _ _ 25-30 ft-lbs
Cylinder head bolts _ _ _ _ _ 14-18 ft-lbs
Connecting rod capscrews _ _ 14-18 ft-lbs
4-3. Tabulated Data
Engineto-base screws _ _ _ _ _ _ _ 6-8 ft-lbs
a. General. This paragraph contains a l l
Main bearing plate cap-
14-18 ft-lbs
overhaul data pertinent to direct and general
screws.
Table 4-1. REPAIR AND REPLACEMENT STANDARDS.
4-1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals