|
| |
TM 9-2330-398-24
3-31.
FILTER SEPARATOR REPLACEMENT (continued).
b.
INSTALLATION
NOTE
Filter separator should be centered on mounting straps, with drain valve at the bottom and outlet line
opening facing rear.
1.
Install filter separator (1) and webbing (21) on semi-trailer with two mounting straps (20), washers (19), nuts (18), and
new self-locking nuts (17). Tighten nuts (17 and 18) between 142 and 158 lb.-ft (192 and 214 N•m).
NOTE
•
Tighten all fittings after hoses are connected.
•
Coat male threads of fittings with anti-seize tape.
2.
Install tee fitting (16) on drain valve (14), and
connect hose (15) to tee fitting (16).
3.
Install fitting (10) on top of filter separator (1), and
connect hoses (9, 11, 12, and 13) to fittings (10).'
4.
Tighten fittings (10).
3-98
|
