|
| |
TM 9-2330-398-24
3-31.
FILTER SEPARATOR REPLACEMENT (continued).
3.
Remove four screws (7) and two couplings (8) and two seals (6) from inlet and outlet lines (5) at filter separator (1).
4.
Disconnect hoses (9, 11, 12, and 13) from fittings
(10) on top of filter separator (1), and remove fittings
(10) from filter separator (1).
5.
Disconnect hose (15) from tee fitting (16) at drain
valve (14), and remove tee fitting (16) from drain
valve (14).
NOTE
Position forklift under filter separator to
support weight.
6.
Remove two self-locking nuts (17), two nuts (18),
and self-locking washers (19), mounting strap (20),
and webbing (21) from filter separator (1), and
remove filter separator (1) from semi-trailer. Discard
self-locking nuts.
3-97
|
