|
| |
TM 9-2330-398-24
Section VII. FILTERS, SEPARATORS, AND PURIFIERS MAINTENANCE
Paragraph
Page
Number
Paragraph Title
Number
3-30
General.......................................................................................................................................... 3-96
3-31
Filter Separator Replacement ....................................................................................................... 3-96
3-32
Drain Valve Assembly and Tubing Replacement.......................................................................... 3-100
3-30. GENERAL
This section describes and illustrates removal and installation procedures for the filter separator and drain valve assembly
and tubing.
3-31.
FILTER SEPARATOR REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
•
Seal (2) (Item 151, Appendix F)
•
Common no. 1 tool set (Item 1, Appendix B)
•
Self-locking nut (2) (Item 176, Appendix F)
•
General mechanic's tool kit (Item 4, Appendix B)
•
Forklift (Item 5, Appendix B)
Equipment Conditions:
•
Semi-trailer uncoupled (refer to TM 9-2330-398-10).
Materials/Parts:
•
Semi-trailer bonded and grounded (refer to
•
Petrolatum (Item 24, Appendix C)
TM 92330-398-10).
•
Tape, anti-sieze (Item 30, Appendix C)
•
Semi-trailer drained and purged (refer to
TM 9-2330-398-10).
a.
REMOVAL
1.
Close valve M (2) on curb side of semi-trailer.
2.
Position suitable container under filter separator (1).
Open manual drain valve N (4), and remove drain
plugs (3) to remove any fluid from filter separator (1).
3-96
|
