| |
TM 9-2330-398-24
3-27.
ALTERNATOR REPAIR.
This Task Covers:
a.
Disassembly
b.
Cleaning and inspection
c.
Assembly
d.
Adjustment
Initial Setup:
Tools/Test Equipment:
Gasket (Item 26, Appendix F)
General mechanic's tool kit (item 4, Appendix B)
Gasket (Item 27, Appendix F)
Common No. 1 tool set (Item 1, Appendix B)
Equipment Conditions:
Materials/Parts:
Alternator removed (para 2-100).
Grease (Item 17, Appendix C)
a.
DISASSEMBLY
NOTE
Steps 1 through 6 cover removal of the voltage regulator.
Tag electrical leads prior to disassembly to aid in assembly.
1.
Place alternator (11) in vise with brass vise jaw caps.
2.
Remove four screws (1), and lift regulator (2) and
gasket (3) from alternator (11).
3.
Remove screw (5) and red lead (4) from right
(positive) terminal of regulator (2).
4.
Remove screw (8) and black lead (9) from left
(negative) terminal of regulator (2).
5.
Remove two nuts (7) and diode electrical lead (6)
from regulator housing (8).
6.
Remove and discard gasket (3) from alternator (11).
3-84
|