|
| |
TM 9-2330-398-24
2-100. ALTERNATOR, MOUNTING BRACKET, AND V-BELT ADJUSTMENT AND REPLACEMENT (continued).
1.
Remove screw (18), two washers (19), and self-locking nut (21) from alternator (1), adjusting arm (12), and guard
(7). Discard self-locking nut.
2.
Remove screw (17), two washers (11 and 16), self-locking nut (10), and adjusting arm (12) from mounting bracket
(13). Discard self-locking nut.
3.
Remove two screws (15) and washers (14) and mounting bracket (13) from engine.
4.
Loosen two screws (2) and pull down alternator (1) to release tension on alternator V-belt (9). Remove V-belt from
pulley (23).
2-210
|
