|
| |
TM 9-2330-398-24
2-76.
HOSE TROUGH ACCESS COVER REPLACEMENT (continued).
b.
INSTALLATION
NOTE
Installation of road-side or curb-side hose trough access cover is the same. Road-side access
cover is shown.
1.
Install snaphook (14) on chain (12) with S-hook (13).
2.
Install two webbings or wire rope assemblies (9) on hose trough access cover (3) with two screws (5), four
washers (4), and two new self-locking nuts (6).
3.
Install access cover (3) on hose trough (11) in open position.
4.
Install two webbings or wire rope assemblies (9) on hose trough (11) with two screws (7), four washers (8), and
two new self-locking nuts (10).
5.
Close access cover (3) and secure with four screws (1), washers (16), and new self-locking nuts (15).
6.
Attach snaphook (14) on hose trough ring (2).
FOLLOW-ON MAINTENANCE:
• Disconnect ground (refer to TM 9-2330-398-10).
2-171
|
