|
| |
TM 9-2330-398-24
2-76.
HOSE TROUGH ACCESS COVER REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic's tool kit (Item 4, Appendix B)
• Semitrailer uncoupled (refer to TM 9-2330-398-10).
• Semitrailer bonded and grounded (refer to
Materials/Parts:
TM 9-2330-398-10).
• Self-locking nut (4) (Item 166, Appendix F)
• Self-locking nut (4) (Item 169, Appendix F)
a.
REMOVAL
NOTE
Removal of road-side or curb-side hose trough access cover is the same. Road-side access cover
is shown.
1. Unhook snaphook (14) from hose trough ring
(2).
2. Remove four screws (1), washers (4), and self-
locking nuts (15) from hose trough access cover
(3) and hose trough (11). Discard self-locking
nuts.
3. Open access cover (3) and remove two screws
(7), four washers (8), two self-locking nuts (10)
and webbings or wire rope assemblies (9) from
hose trough (11). Discard self-locking nuts.
4. Remove access cover (3) from hose trough (11).
5. Remove two self-locking nuts (6) and webbings
or wire rope assemblies (9), four washers (4),
and two screws (5) from access cover (3).
Discard self-locking nuts.
6. Remove snaphook (14) and S-hook (13) from
chain (12).
2-170
|
