|
| |
TM 9-2330-272-14
5-5.
LANDING LEG REPAIR (Con’t).
3.
Lubricate outer bearing (12) with grease and install on operating screw (18).
4.
install woodruff key (17) on operating screw (18).
5.
Install bevel gear (11) and nut (10) on operating screw (18). Stake nut by making two punch marks on end of
operating screw.
6.
Install new oil seal (19) and nut sleeve (20) on operating screw (18). Position nut sleeve approximately 12½ in.
(31.7 cm) from bottom of operating screw.
5-10
|
