|
| |
TM 9-2330-272-14
5-5.
LANDING LEG REPAIR (Con’t).
3.
Inspect parts for wear, distortion, and cracks. Replace any worn, distorted, or cracked parts.
4.
Inspect operating screw for straightness by rolling on flat surface. Replace if bent.
5.
Clean and inspect bearings in accordance with TM 9-214. Discard if damaged.
c. ASSEMBLY
1.
Lubricate inner bearing (16) with grease and install on operating screw (18).
2.
Install outer cup (13) and inner cup (15) in retainer (14). Install retainer on operating screw (18).
TA702853
5-9
|
