|
| |
TM 9-2330-272-14
5-5.
LANDING LEG REPAIR (Con’t).
7.
8.
9.
10.
11.
NOTE
When positioning oil reservoir, lower leg, and stop plate on operating screw, ensure
that holes aline with hole In nut sleeve.
Position oil reservoir (1), lower leg (4), and stop plate (5) on operating screw (18) and install two dowels (6).
Install new felt strip (2) into ring (3).
NOTE
Use care not to displace felt strip when passing end of lower leg through ring.
Position ring (3) on upper leg (7) and insert lower leg (4) In upper leg.
Install operating screw (18) into lower leg (4) and until oil seal (19) is seated.
Install new Iockwasher (8) and screw (9) into upper leg (7).
FOLLOW-ON TASKS:
• Install gearbox (para 4-51).
• Lubricate landing leg (Chapter 3, Section I)
5-11
|
