|
| |
TM 9-2330-272-14
4-34. HYDRAULIC LINES, HOSES, AND FITTINGS REPLACEMENT (Con’t).
b.
LINES AND AXLE MULTIPLE CONNECTOR REPLACEMENT
1.
2.
3.
4.
5.
6.
7.
8.
NOTE
l A drain pan should be used to catch any draining brake fluid. Ensure that ail spills are
cleaned up.
l This procedure covers right and left lines.
Disconnect two tube assemblies (4) from connectors (3) and multiple connector (9).
Remove two locknuts (5), clamps (6), and tube assemblies (4) from axle (10). Discard locknuts.
If connected, disconnect hose assembly (2) from multiple connector (9).
Remove locknut (8) and multiple connector (9) from axle (10). Discard locknut.
Install multiple connector (9) on axle (10) with new locknut (8). Connect hose assembly (2) to multiple connector.
Install two tube assemblies (4) on multiple connector (9).
Install two clamps (6) on tube assemblies (4) and axle (10) with two new locknuts (5).
Connect two tube assemblies (4) to connectors (3).
FOLLOW-ON TASKS:
l Bleed brakes (para 4-35).
4-59
|
