|
| |
TM 9-2330-272-14
4-34. HYDRAULIC LINES, HOSES, AND FITTINGS REPLACEMENT.
This Task Covers:
a.
Hose Assembly Replacement
b.
Lines and Axle Multiple Connector Replacement
/nitial Setup:
Equipment Conditions:
Materials/Parts:
. Wheels chocked.
l Rags (Item 14, Appendix E)
s Air reservoir drained.
c One gasket
TooIs/Test Equipment:
l Three locknuts
l General mechanic’s tool kit
l Common no. 1 shop set
a .
HOSE ASSEMBLY REPLACEMENT
NOTE
A drain pan should be used to catch any draining brake fluid. Ensure that all spills are
cleaned up.
1.
Remove hose assembly (2) from straight adapter (1) and multiple connector (9). Remove gasket (7) from hose
assembly. Discard gasket.
2.
Position new gasket (7) on
adapter (1).
hose assembly (2). Install hose assembly on multiple connector (9) and straight
4-58
|
