Figure 1. V-pallet for drums (containers) filled with gasoline

(2) Position V-pallets on the conveyors,

a n d load one drum on each pallet. Secure

drums during movement to aircraft.

( 3 ) Position aircraft ramp with organic

conveyors to match level of conveyors in truck

bed.

(4) Manhandle the pallets from transport-

ing truck into aircraft, and position at tiedown

locations.

(5) Tie down the items in accordance with

figures 3 and 4 and table 1. Twelve CGU-1/B

and four MB-1 tiedown devices are required.

Figure 1. V-pallet for drums (containers) filled with gasoline

(4) Four sections of 15- to 20- foot-length

wheel or roller conveyors in addition to the

installed conveyors organic to the aircraft.

b . On-loading.

( 1 ) Position conveyors in truck bed as

shown in figure 2. Place conveyors with roller

s i d e s up and extending approximately 12

inches over the rear edge of the truck bed.

Figure 3. Drums, fabric, collapsible, tied down on V-

pallets. View looking aft in aircraft.

Figure 2. Placement of conveyors in truck bed.