|
| |
TM 5-4320-306-24
2-19. REPLACE/REPAIR DISCHARGE MANIFOLD ASSEMBLY AND DISCHARGE ELBOW (Continued)
9
Install discharge elbow (16) and new gasket (17) on check valve assembly studs (14).
10
Install 10 nuts (12) and 10 lockwashers (13). Tighten nuts.
11
Install gasket (11), support bracket (10), and gate valve (9) on discharge elbow studs (8).
12
Install two lockwashers (7) and two nuts (6) on studs (8). Tighten nuts.
13
Install new gasket (5) and flange (4) on gate valve (9).
14
Install 12 cap screws (1), 12 lockwashers (2), and 12 nuts (3). Tighten screws (1).
2-77
|
