| |
TM 5-4320-306-24
2-19. REPLACE/REPAIR DISCHARGE MANIFOLD ASSEMBLY AND DISCHARGE ELBOW (Continued)
ASSEMBLY:
1
Install air valve cover assembly (17) and new gaskets (18) on 180-degree elbow (10).
2
Install six lockwashers (16) and six cap screws (15). Tighten cap screws.
3
Install air release valve vent hose (14) and hose clamp (13).
4
Install shutoff valve vent hose (12) and hose clamp (11).
5
Install 90-degree elbow (9) and reducer (8) on 180-degree elbow (10).
6
Install discharge pressure hose (7). Tighten hose clamp (6) securely.
7
Install check valve assembly (4) and new gasket (5) on 180-degree elbow.
8
Install eight lockwashers (2) and nuts (1) on studs (3).
2-76
|