|
| |
TM 5-4320-306-24
3-11. REPLACE/REPAIR OIL PUMP ASSEMBLY (Continued)
6 Place new preformed packing (15) on the end of hydraulic pipe (14) and slide pipe with
assembled oil pump into the lube oil inlet port of the crankcase. Be sure the preformed
packing seats properly to provide a seal.
7 Using screw (12) secure the assembled yoke spring (13), oil pump (7), and hydraulic pipe (14)
to the crankcase. Do not tighten screw.
8 Using screw (8) and spring lockwasher (9), secure shield (10) and washer (11) to oil pump (7),
and the pump to the crankcase Do not tighten screw.
3-57
|
