| |
TM 5-4320-304-14
TM 08922A-14/1
Table 2-2. Operators Preventive Maintenance Checks and Services Continued
B Before Operation
A After Operation
M Monthly
D During Operation
W Weekly
ltem
No.
1
2-6
Interval
l
l
l
l
l
l
l
ITEM TO BE INSPECTED
PROCEDURE
Frame Assembly and Warning Plates - Continued.
Visually inspect all frame welds for cracks. Inspect
only those welds that can be seen without dis-
assembly.
Check that warning plates (2), identification plate (4),
and throttle plate (5) can be read.
Check visible areas of rails (6 and 7) for corrosion and
damage.
Check shock mounts (8) for splitting.
Check that cranking handle (9) is securely attached
to the frame. Check cranking handle (9) for corrosion
or damage.
Check for indications of corrosion in areas between
all mated parts.
Check condition of paint. Paint shall be in good
I
condition with no bare metal or corrosion.
Equipment is
Not Ready/
Available If:
|