Identification and Tabulated Data - TM-5-4320-258-340009

TM 5-4320-258-34

1-6.

Identification and Tabulated Data

Part number ........................MA24-900G

a. Identification. The centrifugal pump has

Voltage ..............................24

Amperage output.................35

three identification plates.

(b) Voltage regulator.

(1) US data plate. The US data plate is

Manufacturer.......................Motorola

located on front of the pump above the suction flange.

Part number ........................70C44707B

It indicates the pump identification number, serial

number, dimensions, weight, and shipping information.

(2) Engine plate. The engine data plate is

Manufacturer.......................Delco-Remy

Part number ........................1108271

located on alternator side of the engine block. It

Voltage ...............................24

indicates engine identification numbers, serial number,

(d) Magneto.

valve tappet clearance information, and patent

Manufacturer.......................Slick

information.

(3) Instruction plate.

Model No. ...........................625

The pump

(e) Fuel pump.

instruction plate is located in the cover of the control

Manufacturer.......................AC Spark Plug

panel. It identifies the controls and provides basic

Part number ........................5594228

operating instructions.

(f) Air cleaner.

b. Tabulated Data.

(1) Pump.

Manufacturer.......................Donaldson

Part number ........................FWG06-5032

Manufacturer.......................Barnes Manufacturing

(g) Oil filter.

Company

Manufacturer.......................Fram

Part number ........................US67CCG

Part number ........................

C7407

Serial number range............37628-001 thru 37628

(4) Overall dimensions and weight.

047

Overall length .....................111 in.

Type....................................Centrifugal

Overall width .......................31 in.

Pumping medium ................Petroleum products

Overall height .....................55 in.

Output (at maximum rated

Overall weight .....................4000 lb

speed) ...........................245 gpm at 205 feet

Shipping weight...................4270 lb

head 1120 gpm at 100

Shipping volume .................201 cu ft

feet head

(5) Engine torque specifications.

Maximum rated driven speed 2450 rpm

Item

Torque (ft-lb)

Suction port size .................6 in.

Discharge port size..............6 in.

(2) Engine.

Cylinder head bolts .............

35-40

Main bearing cap bolts ........

85-95

Manufacturer.......................Continental Motors

Flywheel nuts ......................

35-40

Corporation

Manifold nuts ......................

25-30

Model ..................................

FS244-06097P

Gear cover bolts and nuts

Type....................................

Four-stroke-cycle

5/16 in ...........................

15-20

Number of cylinders ............6

3/8 in ..............................

25-30

Displacement ......................244

Oil pan bolts ........................

12-16

Compression ratio ..............6.9:1

Flywheel housing bolts .......

50-55

Cooling ...............................Liquid

Filler block bolts .................

15-20

Cooling system capacity......18 qts

Front end plate bolts ...........

25-30

Crankcase oil capacity ........5 qts

Camshaft thrust plate bolts..

15-20

Valve clearance (warm)

Water pump bolts ...............

25-30

Intake .............................0.014 in.

Magneto bolts .....................

25-30

Exhaust ..........................0.016 in.

Governor bolts ....................

25-30

Spark plug gap ....................0.025 in.

Breaker point gap ................0.020 in.

(6) Wiring diagram. See figure 1-3.

Firing order .........................1-5-3-6-2-4

Governed speed..................2450 rpm

Overspeed cutout................2700 rpm

(3) Engine accessories.

(a) Alternator.

Manufacturer.......................Motorola

1-4