| |
TM 5-4320-228-13&P
2-14.
OPERATION IN SALT WATER AREAS.
a. Salt water causes corrosive action on metal.
Care must be
taken to avoid contact with salt water.
After contact with salt water,
wash unit with clean, fresh water.
b.
Coat exposed metal with rustproofing material.
Remove any
rust immediately and cover exposed surface with a coat of paint.
c. Clean lubrication surfaces prior to lubricating.
Lubricate
engine in accordance with current lubrication order LO 5-2805-203-14 and
and TM 5-2805-203-14.
2-15.
OPERATION AT HIGH ALTITUDES.
Because of thinner air at higher altitudes, the carburetor may
require an adjustment providing a leaner mixture.
If this condition
exists, refer to TM 5-2805-203-14.
2-15/(2-16 Blank)
|