|
| |
TM 5-4320-228-13&P
Figure 2-3.
Pump draining instructions.
2-12.
OPERATION IN DUSTY OR SANDY AREAS.
a.
If installation is permanent, erect protective shield for
pump.
If installation is temporary, take advantage of natural bar-
riers which offer protection from dust and sand.
b.
Service air cleaner daily to keep fuel system free from sand
and dirt (TM 5-2805-203-14).
Strain all fuel before adding to fuel tank.
Drain and service
fuel filter more frequently than under normal conditions (3-5.2).
d.
Clean pump frequently.
Wipe it with a cloth dampened in
approved cleaning solvent.
Lubricate engine in accordance with current lubrication order
LO 5-2805-203-14 and TM 5-2805-203-14.
2-13.
OPERATION UNDER RAINY OR HUMID CONDITIONS.
a.
If unit is outside and not operating, cover unit with canvas
or other waterproof material during damp, rainy weather.
Remove cover
during dry weather to allow unit to dry out.
b.
Keep fuel tank full all times to prevent condensation.
Drain
and service fuel filter frequently (paragraph 3-5.2).
c.
Humid conditions can cause corrosion and deterioration of
electrical components.
Keep electrical components clean and dry.
d.
Lubricate engine in accordance with current lubrication order
LO 5-2805-203-14 and TM 2805-203-14.
2-14
|
