|
| |
TM 10-6630-240-12&P
TM 01461B-12&P/1
CAUTION
Do not over -tighten or damage to the monitor membrane may occur.
c.
Connect the bypass hose (1) from the three-way valve (2) to either bypass port (3) located on the sides of the
sampler valve base (4). Press the hose down firmly into the port for a tight fit. (figure 2-3)
Figure 2-3
d.
Screw the remote sampling assembly (1) onto the sampler base (2). Force the nylon plug (3) into the open port
(4) on the side of the sampler base tightly plugging the port hole to prevent leakage. (figure 2-4)
Figure 2-4
2-4
|
