|
| |
TM 10-5430-242-12&P
0005 00
Change 1
0005 00-12
Installation of Filler/Discharge Hose Assembly and Filler/Discharge Valve Assembly
NOTE
The filler and discharge hose assembly is fitted with a quick-disconnect female coupling
on one end and a quick-disconnect male adapter on the other end.
1. Place female coupling (1) on male adapter (2) end of filler/discharge elbow (3).
2. Push coupling cam-lever arms (4) into position to lock the hose assembly in place.
3. Place male adapter (5) end of the hose into female coupling (6) of the gate valve (7).
4. Push coupling cam-lever arms (4) into position to lock the hose assembly in place.
5. Gate valve (7) is fully opened by rotating hand-wheel (9) to the left, and backing off one-quarter turn.
6. Gate valve (7) is fully closed by rotating hand-wheel (9) to the right and backing off one-quarter turn.
Note the difference in exposure of the handle stem between the closed and open positions.
7. Ball valve (8) is fully opened by rotating handle (10) until handle (10) is parallel to the valve body.
8. Ball valve (8) is fully closed by rotating handle (10) until handle (10) is perpendicular to the valve
body.
3
GTA MODELS
RELIANCE AND MPC
MODELS
2
9
10
6
5
1
4
8
7
4
|
