|
| |
TM 10-5430-242-12&P
0005 00
Change 1
0005 00-10
NOTE
Normally the vent pipe and female coupling half will be received pre-assembled.
2. Inspect female coupling half (4) and vent pipe (5) for cleanliness.
3. Check to see that relief cap (6) operates freely.
4. Check that flame arrestor (7) is installed.
5. Check that relief cap (6) is installed tightly on vent pipe (5).
6. Check that gasket (8) is in place and correctly seated.
7. Insert female coupling half (4) over flanged adapter (9), with cam-lever arms (10) in the outward
position.
8. Press cam-lever arms (10) upward, and inward, to lock vent pipe (5) into operating position.
4
10
9
6
7
8
5
|
