|
| |
TM 10-5430-242-12&P
0005 00
0005 00-9
Change 1
4. Install drain hose (2).
WARNING
Check that the drain ball valve has been rotated clockwise to the closed position
before proceeding. Failure to close the valve handle can cause loss of fuel and
possible fire or explosion.
5
Move cam-lever arm on the ball valve (3) to the outward position. Install ball valve (3) onto end of
drain hose (2). Push cam-lever arms down to lock ball valve (3) in place on hose (2).
6. Return the tank end to the flat position, laying drain hose (2) and ball valve (3) to the outside of tank.
7. Repeat steps 1 through 6 to install other drain hose and ball valve.
Installation of Vent Pipe Assembly
CAUTION
Prior to installing the fuel tanks, check all coupling gaskets and sealing surfaces to
ensure they are in place and serviceable.
NOTE
Dust cap is chain-attached to prevent loss.
1. Remove dust cap (1) by pulling cam-lever arms (2) outward, and lifting up on dust cap (1).
1
2
3
|
