|
| |
TM 10-5430-237-12&P
0005 00
0005 00-6
CAUTION
Do not over-inflate the tank collar. Maximum air pressure is 0.5 psi (3.4 kPa).
Tank collar may be damaged if over-inflated.
CAUTION
The tank collar may also be inflated by attaching a standard automotive pump to
the automotive valve (located on the other side of the tank) but is not recommended
as damage may occur to collar.
3. Operate the foot bellows to inflate the collar (2) until firm.
4. Remove the bellows tube and replace the inflation valve plugs (1).
NOTE
A firm touch approximates 0.5 psi (3.4 kPa).
5. Remove the inflation valve plug (1) on the cover float. Insert foot bellows hose into float inflation valve.
CAUTION
Do not over-inflate the cover float. Maximum air pressure is 0.5 psi (3.4 kPa).
Cover float may be damaged if over-inflated.
6. Operate the foot bellow to inflate the cover float (2) until firm.
NOTE
A firm touch approximates 0.5 psi (3.4 kPa).
7. Remove foot bellow hose and replace float inflation valve plug.
|
