|
| |
TM 10-4930-246-13&P
C)
PLATE
(r@c@
LEVER
\\J@
Figure5-3. PlateandLeverAlinement
(13) Removelever(7)frombody(6).
(14) Remove preformed packing (20) and packing retainer (21) from lever (7).
NOTE
Crank pin will be loose and can fall out when removing link assembly.
(15) Remove assembledshaft (10), pin (22), link (23) and earnplate (24) from body (6).
(16)
Remove cotter pin (25), nut (26), screw (27), and crank pin (22). Discard cotter pin.
(17)
Use needle nose pliers to remove continuity clip (28) if it is to be replaced.
5-5
|
