| |
TM 10-4930-241-13
2-18. OPERATING PROCEDURES - CONT.
(7)
Refuel Mode - Refueling Points. Refer to figure 2-37.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
NOTES
Handles on arctic nozzles may be opened to allow fuel flow to
service one or two vehicle/equipment at the same time. Open
handles as needed to support your mission.
Handwheels on fueling manifolds may be opened to allow fuel
flow from one or two bottom loading points. Open handles as
needed to support your mission requirements.
Ensure vehicle/equipment is properly grounded.
(a) Turn handwheel (1) to open position fueling manifold.
(b) Install arctic fuel and oil servicing nozzle (2) in servicing port on vehicle/'equipment.
(c) Push handle (,3) on arctic nozzle (2) forward to service vehicle/equipment.
(d) When vehicle/'equipment is full, pull handle (3) to closed position and remove from
servicing port and disconnect ground.
(e) Turn handwheel (1) to closed position on fueling manifold.
Figure 2-37. Refuel Mode - Refueling Points.
2-84
|