| |
TM 10-4930-241-13
2-18. OPERATING PROCEDURES - CONT.
(6)
Refuel Mode - Drum Filling Points. Refer to figure 2-36.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal
surfaces in subzero temperatures. Always wear arctic mittens when
handling components.
NOTES
Handles on tank couplers may be opened to allow fuel to one or
two tankers at the same time. Open handles as needed to
support your mission.
Ensure vehicle/equipment is properly grounded.
(a) Connect tank coupler (1) to tanker/equipment being refueled.
(b) Open valves (2 and 3).
(c) When tanker/equipment is full, close valves (2 and 3) and disconnect tank coupler
(1).
(d) Turn handwheel (2) to closed position on fueling manifold.
(e) When fueling operation is completed, shutdown 600 GPM pump.
(f)
Close all valves.
Figure 2-36. Refuel Mode - Drum Filling Points.
2-83
|